American Arms Engineering
FIREARMS REFINISHING
BLUING
Matte Finish: A non-glare finish; also hides minor dings & scratches.
• Rifles & Shotguns $195.00
• Pistol & Revolvers 125.00
SATIN POLISH: Matches the finish of factory bluing.
• Rifles & Shotguns $275.00
• Pistol & Revolvers 225.00
(the polishing of the weapon is most important- a lot time and effort is used to keep all corners sharp. Lots of shops offer $100.00 bluing jobs- but that`s what you get! Please keep this in mind when it comes to weapons refinishing)
STAINLESS STEEL FINISHING
"Shadow Blast" finish is a silky satiny finish, excellent choice for
any stealth situation.
• Long Guns $175.00
• Handguns 115.00
WOODWORK
Strip & Refinish, minor scratches removed, hand rubbed oil finish.
• Average Stock $195.00
• Complicated Stock $255.00
Recut checking while being refinished ADD-
• Complicated Pattern $150.00
• Average Pattern 75.00
• Broken or severely damaged stocks, P.O.R.
American Arms Engineering
RECOIL REDUCTION
MUZZLE BRAKES
• Standard Installation - Auto loader Add $25.00 - $185.00
• Varmint brakes $199.00
• Brakes installed on Desert Eagle 10" or longer requires
removal
• Of front sight $255.00
RECOIL PADS
STOCK CUT TO YOUR L.O.P
• Gracoil Adj. pad system w/kick EEZ $225.00
• Gracoil Hyd. Adj. recoil system 375.00
• Pachmyer vent field installed 85.00
• Decel or kick-EEZ installed 99.00
• Morgans Adj. pad str. Or curved 75.00
Synthetic stock and some woods may require adding a support
system. Please inquire.
MERCURY RECOIL SUPPRESSOR (REDUCERS)
• P & L Install factory stock bolt in stock $55.00
• P & L Custom stock installation (starting at) 75.00
American Arms Engineering
1911 COLTS & CLONES
SLIDE TO FRAME TIGHTENING
• Blue $85.00
• S.S. 95.00
TRIGGER WORK WITH STOCK PARTS 4 TO 4.5 LBS CRISP
• SERIES 70 $80.00
• SERIES 80 90.00
LABOR ONLY
Install match barrel & fit match bushing $125.00
Drill & tap for optical mount-up to 10 holes 75.00
Install sights-staked-bore sighted 35.00
Install sights dovetail-bore sighted 25.00
Machine slide for dovetail front 60.00
Fit after market trigger 30.00
Fit beavertail grip safety (refinishing not included) 85.00
Fit thumb safety single 35.00
Amb 45.00
Fit extended magwell (refinishing not included) 65.00
Bevel and enlarge mag chute 40.00
Throat & polish frame and barrel 45.00
Fit or tune Extractor 25.00
Fit or tune Ejector 25.00
Install compensated barrel 225.00
Install oversized mag released (parts included) 50.00
Serration on front of slide 65.00
Serration on back of slide 40.00
Checkering on back of slide 70.00
Fit match bushing w/recrown of barrel 50.00
Recrown barrel 30.00
American Arms Engineering
1911 COLTS & CLONES - CARRY PACKAGES
Throat and polish frame and barrel, tune extractor,
Tune ejector, tune 2 mag's $70.00-Add $10.00 per extra mag
Enhance this package with trigger job $65.00
With all the possibilities of this pistol we will put a package together to
suit your specific needs, also e-mail us with your requirements and not
only will we build you one of the finest 1911 pistol's on the line but we
will give you a discount on multiservice selections.
American Arms Engineering
REVOLVERS
• Butter smooth action jobs $95.00
• Ruger Black Hawks 85.00
• With free spin pawl free spin cylinder add 50.00
• Retime Revolver P&L 85.00
• True and recut forcing come 35.00
• Install night sites (inquire on model/labor) 35.00
• Install sling studs-P.O.R.
• D&T mount and bore sight 75.00
• Mount and bore sight factory D&T gun 25.00
• Bob hammer during action job 20.00
• Recontour trigger & polish during action job 30.00
• Recontour trigger & polish 45.00
• Convert to round butt (K & L)
• Refinish included 90.00
• Chamber cylinder, polish chambers 45.00
• Rebarrel does not include barrel 105.00
• Most modern revolvers
American Arms Engineering
SHOTGUNS
• Open choke to customers specifications $55.00 per BBL
• Chrome lined Add 10.00
Lengthening Forcing Cone
• 2-1/2"and mirror polished 10 gauge, 12 gauge, 20 gauge
$55.00 per BBL
• Chrome lined - 12 gauge only $65.00 per BBL
• Trigger work starts at $85.00
• ADJ-combs/Monte Carlo 225.00
Straight combs 275.00
• Cut and recrown barrel resetting bead 50.00
• Install center bead on ribbed barrel P&L 20.00
• Install front and center beads P&L 45.00
• Drill and tap for scope, price includes M&B 85.00
Side Mount 95.00
• Install vented Rib (starting at) 125.00
• (P&L) Install rifle sights on plain barrel 150.00
Resolder ribs (starting at) 65.00
Switch safety 25.00
• ADJ Combs with Morgan Pad (monti) 295.00
(straight) 350.00
• ADJ Comb with Gra-coil HYD Reducer 650.00
*Most Models
• Install swivels, most models (uncle mikes) 35.00
• Install cantilever mount on barrel 200.00
American Arms Engineering
RIFLE SMITHING
Trigger Jobs
• Most models will range from 2 to 4 lbs Crisp. $95.00
We take pride in our triggers!
• Install after market trigger (labor only)
Canjar/Timney, etc. (starting at) 45.00
• Free floating barrel 45.00
• Glass bedding of action and free floating of barrel 130.00
• Full length glass bedding 165.00
• Pillar bedding 175.00
• Chamber cast 60.00
• Mount and bore sight (factory drilled) labor 25.00
• Drill and tap mount and bore sight labor 75.00
• Drill and tap for peep sight 40.00
• Install peepsight-boresighted 25.00
• Fit and bed aftermarket synthetic stock 150.00
• Zero-in rifle with customer ammo 25.00
• Install swivels, most models (uncle mikes) P&L 35.00
To have your arm perform like never before we recommend this
service. Accuracy package #2 which includes muzzle, recrowned,
barrel is floated, and trigger is reworked to perfection. You can
expect at least a 20% increase of accuracy 135.00
American Arms Engineering
COLT AR-15 AND CLONES
Clean complete with safety inspection $85.00
Install free floating hand guard 60.00
Parts and Labor-Install Bi-pod stud on hand guard 30.00
Install our muzzle brake 70.00
Parts and Labor-sweated and pinned 135.00
Install customer supplied brake 45.00
Install barrel on upper and H.S. 65.00
Install after market trigger system (labor only) 45.00
Target crown on barrel 65.00
Throat and polish feed ramp and polish chamber 65.00
Smooth stock safety 30.00
Replace gas block (labor only) 30.00
Install extend charging handle 30.00
4 Position ADJ-Butt plate (installed) 160.00
Mount and bore sighting of optics 25.00
We will also custom build your dream AR, whether tactical or varmint.
We will give you a total reliable tack driving system off your lower.
AR-15 ENHANCEMENT PACKAGE
• Recrown $40.00
• Throat and Polish 40.00
• Polish chamber 20.00
• Free float tube included 40.00
• Trigger job 65.00
• Smooth safety 20.00
• Buff action tube (if necessary) 20.00
Complete $245.00
AR-15 UPPER ONLY ENHANCEMENT PACKAGE
• Recrown $40.00
• Throat and Polish 40.00
• Polish chamber 20.00
• Free float tube installed 65.00
Complete $165.00
American Arms Engineering
MAUSER 96/98
PRACTICAL HUNTING PACKAGE
LEUPOLD OR SIMILAR IS RECOMMENDED:
1. Bolt handle is altered to clear lower scope mountings
2. Replace safety with 2-position low profile safety
3. Trigger is reworked to 3 to 4 lbs crisp
4. Include your optic and we will mount and bore sight, or purchase
from us.
5. Recrown the barrel to aid in accuracy increase
Complete Package $225.00
BOLT ACTION RIFLE ACCURACY PACKAGE
1. Muzzle Brake, Trigger Job, Free Float Barrel $265.00
2. Recrown Barrel, Trigger Job, Free Float Barrel 135.00
3. Recrown Barrel, Free Float, Trigger Job, Glassbed 265.00
4. Recrown Barrel, Free Float, Trigger Job, Glassbed
with Muzzle Brake 375.00
COWBOY ACTION ARMS
1. Marlin and Winchester lever guns
Smoothed, honed, slick $125.00
American Arms Engineering
MUZZLE LOADER-BLACK POWDER
• Recrown of barrel $35.00
• EZ Load-Muzzle is overbore to 1" deep to aid in a snug but true
alignment thus eliminating Sabot or Buffalo bullet deformation
with true muzzle crowns 45.00
• Trigger job-side lock or in-line 55.00
• Clean complete/lock included 65.00
• (Heavy Rust Extra)
• Drill and tap, bend hammer, with Weaver base
• And remountable rings 95.00
• Pull stuck ball 25.00
• Drill and tap for Tang sight 45.00
• Install swivels (parts and labor) 35.00
